|
Stefan Oberparleiter
|
Improved test procedures for the characterization of polymer properties - from DSC measurements considering heat-transfer agents towards the anaysis of water-vapor uptake and its effect on the thermorheologic behavior
|
2024
|
|
Andreas Schaur
|
Effect of bitumen and polymer properties on the formation of a polymer network and thermo-rheological properties of polymer-modified bitumen
|
2023
|
|
Alexander Murr
|
The impact of water vapour transport on the uptake and relaease of moisture in wood
|
2023
|
|
Frowin Ruegenberg
|
Investigations on NHL-based renders and masonry mortars for cultural heritage preservation with focus on the durability
|
2022
|
|
Nikolaus Weinberger
| Characterization and Process Development of a Novel Roll-to-Roll Cu(In, Ga)Se2 Deposition Process Analysis and Optimization of Industrially-Produced Flexible CIGSe Based Thin-Film Photovoltaics | 2021 |
|
Michael Schmid
| Influence of curing temperature and cement composition on early-age concrete strength development: Experimental characterisation, model-based description and prognosis | 2020 |
|
Tobias Bader
| A contribution to the improvement of surface treatment applied to architectural High-Performance Concrete based on artificial weathering experiments | 2020 |
|
Ulrich Hofer
| Experimental characterization and modeling of viscoelastic behavior of man -mad and biomaterials: effect of fiber reinforcement and environmental condition | 2019 |
|
Anupam Akolkar
| Tomography Based Methods for Conduction and Radiation Heat Transfer Through Complex Functional Media |
2018
|
|
Marcus Maier
| Safety assessment of Underground structures subjected to fire loading From a fire spalling test recommendation towards a concrete spalling assessment procedure |
2018
|
|
Christian Rauch
| Betontechnologische Optimierung und Charakterisierung der mechanischen Eigenschaften von Absorptionsbauteilen aus Leichtbeton |
2017
|
|
Gregor Metzler
| Multiscale model for optimizing the thermo-mechanical properties of highly-densified expanded polystyrene (HD-EPS) Geometric characterization of the hierarchical microstructure of bead foams |
2017
|
|
Sebastian Rohm
| Characterization of friction relevant surface parameters and their effect on the fiction between gliding bodies and snow |
2017
|
|
Roland Traxl
| Continuum micromechanics-based determination of effective properties of elastoplastic matrix-inclusion materials: Application within the finite element analysis of indentation and impact problems |
2016
|
|
Pfennig Markus
| Development of a simulation tool for the realistic prediction of chemical/physical processes within coated wood components subjected to fire loading |
2016
|
|
Lun Hans
|
Permeabilität von Beton unter kombinierter thermischer und mechanischer Belastung
|
2015
|
|
Baumgärtner Jürgen Ulrich
|
Faserorientierung im selbstverdichtenden Beton mit der Produktionsoptimierung für den Tübbingbau mit Schnellzement
|
2015
|
|
Unterberger Seraphin
|
Ein Beitrag zum Abzugsverhalten zwischen zementgebunden Materialien und Schalhaut - Experimentelle Untersuchung des Einflusses von Mörtelzusammensetzung, Schalhautmaterial und Oberflächenbeschaffenheit
|
2014
|
|
Diekamp Anja
|
Bindemitteluntersuchungen an historischen Putzen und Mörteln aus Tirol und Südtirol
|
2014
|
|
Bauer Sebastian
|
Two-step determination of strength evolution of heterogenous materials controlled by end- or exothermal chemical reactions
|
2014
|
|
Reinisch Alexander
|
Optimierung von Sichtbetonflächen anhand von Untersuchungen und Steuerung relevanter Parameter
|
2007
|
|
Guido Wimmer
|
Energetische Sanierung von historisch wertvollen Gebäuden in Tirol
|
2007
|
|
Alexander Wanner
|
Auswirkung der Nachbehandlung auf die Dauerhaftigkeit von Betonbauwerken
|
2007
|
|
Christoph Niederegger
|
Technologische Eigenschaften von Betonen aus neuentwickelten Bindemitteln mit optimierten Bestandteilen
|
2004
|
|
Maria Pixner
|
Entwicklung von zementgebundenen Baustoffen mit aufbereitetem Bambus
|
2004
|
